Description
4905-9816 SIMPLEX, TRUEALERT ADAPTER, ADDRESSABLE.
4905-9816 Simplex,Converts a single TrueAlert addressable notification address into separate 24 VDC audible and visible notification outputs:
- Power and communications are supplied by Simplex® 4100ES, 4010ES, and 4007ES fire alarm control panels equipped with power supplies that provide advanced addressable notification from IDNAC Signaling Line Circuits (SLCs), and from 4009 IDNAC Repeaters.
- Operation is also compatible with TrueAlert SLCs from TrueAlert Power Supplies (TPS) or TrueAlert Addressable Controllers (4009T).
- Up to two TrueAlert Addressable Adapter Modules can be connected to one IDNAC SLC.
Appliance control output features:
- Operation modes are: visible and audible appliances both on; or visible appliance only – with activation determined by the control panel IDNAC SLC.
- On-board circuit limits appliance inrush current and provides self-resetting overcurrent protection.
- Wiring to audible and visible appliances is supervised with conventional reverse polarity operation; opens or shorts are reported to the control panel.
Appliance output ratings:
- Regulated 24 DC appliance power; audible output is rated for up to 30 mA, visible output is rated for up to 180 mA.
- Special Applications appliance ratings; audible output is rated for up to 50 mA, visible output is rated for up to 250 mA.
Status diagnostics:
- A visible status LED can be programmed at the connected control panel to indicate polling status and can be activated per address for module testing.
General mechanical features:
- Mounts in standard 4 11⁄16” (119 mm) square electrical box .
- Cover plates (required) are available for surface or flush mount, ordered separately.
- Cover plates provide status LED viewing.
- Screw terminals for wiring connections.
Special Notification Requirements. IDNAC SLCs activate addressable TrueAlert horns and/or strobes in response to commands received from the IDNAC SLC. For applications where appliances other than the standard TrueAlert addressable appliances are required, the TrueAlert Addressable Adapter Module provides a separate audible and visible output individually activated by the IDNAC SLC.
Typical applications are for connection to special weather-proof appliances, appliances with particular sound output characteristics (special bells or chimes), or for connection to appliances that are required to satisfy specific aesthetic requirements.
Maintains TrueAlert Addressable System Advantages. With the TrueAlert Addressable Adapter Module, non-TrueAlert appliances can be controlled while still benefiting from the TrueAlert addressable system’s active supervision to the Adapter Module, multiple diagnostic modes, and supporting of “T-tapped” Class B wiring of the IDNAC SLC connections.
UL listed to Standard 864
Datasheet 4905-9816.
See all our parts for Simplex.
